Drexel University Home Pagewww.drexel.edu DREXEL UNIVERSITY LIBRARIES HOMEPAGE >>
iDEA DREXEL ARCHIVES >>

iDEA: Drexel E-repository and Archives > Drexel Academic Community > College of Engineering > Department of Materials Science and Engineering > Faculty Research and Publications (MSE) > Effect of heating rate on recrystallization of twin roll cast aluminum

Please use this identifier to cite or link to this item: http://hdl.handle.net/1860/2732

Title: Effect of heating rate on recrystallization of twin roll cast aluminum
Authors: Sun, Naiyu
Patterson, Burton R.
Suni, Jaakko P.
Doherty, Roger D.
Weiland, Hasso
Kadolkar, Puja
Blue, Craig A.
Thompson, Gregory B.
Issue Date: Jan-2008
Publisher: Minerals, Metals & Materials Society
Citation: Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 39A(1): pp. 165-170.
Abstract: The effect of heating rate on precipitation and recrystallization behavior in twin roll cast (TRC) AA3105 has been investigated by three different means: conventional air furnace, controlled infrared, and lead bath heating. Experimental results showed that as-recrystallized grain size decreased and became more equiaxed as the annealing heating rate increased. These results were explained via time-temperature-transformation (TTT) curves for both dispersoid precipitation and recrystallization. With the faster heating rate, recrystallization could occur before precipitation of Mn present in the unhomogenized TRC samples. At a heating rate of 50 degree C/s the material underwent grain growth after recrystallization at 500 degree C. No sign of grain growth was observed in materials annealed with lower heating rates, 3 degrees C/s, 0.5 degree C/s, and 0.01 degree C/s due to greater dispersoid precipitation.
URI: http://dx.doi.org/10.1007/s11661-007-9367-3
http://hdl.handle.net/1860/2732
Appears in Collections:Faculty Research and Publications (MSE)

Files in This Item:

File Description SizeFormat
2006175435.pdf536.62 kBAdobe PDFView/Open
View Statistics

Items in iDEA are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! iDEA Software Copyright © 2002-2010  Duraspace - Feedback